lC8 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com l rotary models available c&k p series low profile key switches features/benefits ? low profile design ? multi-pole and multi-position ? panel and pcb mounting ? variety of termination styles typical applications ? ca tv ? low cost security devices ? lawn equipment specifications contact rating: q contact material: 4 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac (ul/csa). see page l-50 foradditional ratings. electrical life: 10,000 make-and-break cycles at full load. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1,000 vrms min. @ sea level. indexing: 45oor 90?o2-3-positions. other functions available, consult customer service center. operating & storage temperature: -30o to 65? materials housing: one piece, 6/6 nylon (ul94v-2), black. finish, matte. key: one nickel plated brass key. contacts and terminals: q contact material: copper, silver plated. see page l-50 for additional contact materials. contact spring: music wire or stainless steel. terminal seal: epoxy. note: any models supplied with q, b or g contact material are rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. note: specifications and materials listed above are for switches with standard options. for information on specific and custom switchlocks, consult customer service center. build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages l-49 thru l-50. for additional options not shown in catalog, consult customer service center. keying 3 one nickel plated brass key 2 two nickel plated brass keys t ype w low profile key switch switch function p10113 sp , 90 index, keypull pos. 1 p20013 dp, 45 index, keypull pos. 1 p20113 dp , 90 index, keypull pos. 1 p1011u sp, 90 index, keypull pos. 1 & 2 p2011u dp, 90 index, keypull pos. 1 & 2 terminations 03 solder lug with hole 02 pc thru-hole wc wire lead contact material q silver b gold g gold over silver seal none no seal e epoxy seal color 2 black finish m matte finish mounting style n with nut
lC9 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com l rotary all models with all options when or der ed with ?r ??otact material. note: all models provided with the same key code. for r eplacement keys or special featur es, consult customer service center. c&k p series low profile key switches switch function keying type term. no s molded on housing = detent positions (45o or 90o ). = k ey pull possible in these positions. = stop positions. legend t erminal num bers molded on bottom of housing. terminal numbers lock color lock type w low profile key switch 2 two nickel pla ted brass keys 3 one nickel plated brass key 2 black color option code note: standard housing color is black. special colors or mixed housing and key plug colors available, consult customer service center . 45o 90o po s itio n 1 & 2 1-3 1-3,5-7 8-1 8-1,4-5 p1 0 11u p2 0 11u sp dp po s itio n 1 1-3 1-3,5-7 8-1 8-1,4-5 p1 0 113 p2 0 113 sp dp 45? po s itio n 1 2-3, 6-7 1-2,5-6 8-1,4-5 p2 0 01 3 dp in d ex i ng sw i tc h co n fi g ura ti o n key pu l l pos i ti on s co n nected te r min als (see te rm in a l loca ti on bel o w.) pos.1 pos. 2 po s . 3 model no . no . poles
lC0 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com l rotary c&k p series low profile key switches finish terminations mounting style seal panel mounting .760 dia. (19,30 ) .640 (16,26) nut part n umber: 17 5050700 3/4-24 uns 1.010 (25,65) .875 (22,23) .125 thk. (3,18) epoxy .075 ma x. (1,91) .020 thk, (0,51) .210 (5,33) .062 (1,57) .050 (1,27) .080 (2,03) .020 thk, (0,51) .224 (5,89) .080 (2,03) .046 (1,17) .085 (2,16) .50 (12,7) 22 awg insulated wire 6.00 (15,24) pc mounting .062 dia. typ .420 dia (10,67 ) 45 ? typ. cont act material e epoxy seal none no seal n with nut 02 pc thru-hole wc wire lead 03 solder lug with hole m matte finish .215 (5,46) max. n (with nut) p anel thickness mounting style black wire standard, other colors, gages, and lengthsavailable, consult customer service center. ul style 1015. * note: see t echnical data section of this catalog for rohs compliant and compatible definition and specifications. 1 cont acts & terminals: copper , with gold plate over nickel plate. 2 contacts & terminals: copper, silver plated (standard with all termination options). 3 cont acts & terminals: copper , with gold plate over silver plate. all models with all options when ordered with ?r ??otact material. note: ?ontact material is equivalent to both ??n ??cotct materials. note: any models supplied with q, b or g contact material ar e rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. co n t ac t an d option co d e te rmin al mater ial ra ti n g q 4 a m ps @ 1 25 v a c o r 28 v d c ; 2 a m ps @ 2 50 a c v a c (ul/csa ) . low leve l/ d ry cir cu it b si l ver 2 po wer 0.4 va m ax . @ 2 0 v a c o r d c m a x rohs co m pl ian t* rohs co m patib l e* ye s ye s ye s ye s low leve l/ d ry cir cu it or po we r g ye s ye s go ld 1 go ld over s i lver 3 0.4 va m ax . @ 2 0 v a c o r d c m a x. o r 4 a mps @ 1 25 v a c or 28 v d c; 2 a mp s @ 2 5 0 v a c (ul/csa )
|
